![](/images/new-backgrounds/1302338/30233831x1.webp)
Daily Gun Care, Flushing, and Cleaning
TI6570A
FIG. 23
13.If the diffuser was removed, trigger the gun while you reinstall the diffuser (5) with the gun tool (30). Tighten the diffuser securely to obtain a good seal. Torque to
14.Install the air cap retaining ring (6), air cap (21), and spray tip (33).
TI6568A
FIG. 24
15.Dampen a soft cloth with solvent and
TI6571A
FIG. 25
16.After cleaning the gun, lubricate the following parts with lubricant 111265 weekly:
•Trigger pivot pin (A)
•Boss on both sides of the gun where the trigger contacts the gun body (B)
•Fluid needle shaft, behind trigger (C)
AB
C
TI6553A
FIG. 26
Reverse-A-Clean® (RAC) Tip
NOTE: Do not soak the RAC tip seat gasket (33a) in sol- vent for extended periods of time or swelling may occur.
Clearing a clogged RAC tip
Release the trigger and engage the trigger lock.
TI6581A
ENGAGED
FIG. 27
16 | 3A0149C |