Graco Inc 800-666, 800-668 manual Trigger SafetyLatch, Installing and Changing SprayTips

-

Trigger SafetyLatch

WARNING

To reducetheriskofseriousbodily injury, including fluid injection, splashing in the eyes or on theskin, ALWAYS engage the trigger safety

latch wheneversprayingstops,evenfor	a
moment.

In the engaged position, the trigger safety latch prevents the gun Nombeingtriggered accidentally by hand or if it is dropped or bumped. Be sure the latch is pushed fully down when engagingit or it cannot prevent the gunfrombeing triggered. See Figure 2.

TRIGGER SAFETY LATCH SHOWN ENGAGED

TRIGGER SAFETY LATCH SHOWN DISENGAGED

Figure 2

Installing and Changing SprayTips

WARNING

1.Follow the Pressure Relief Procedure.

2.Pointthegunandwandawayfromyourselfand anyone else.

3.Withoutholdingyourhandoverthespray tip (A), pull back the quick coupler ring (e). Removeoldthe tip and/or install a new one, and then release the ring. See Figure 3.

4.Besurethe tip is securebeforestartingtospray again.

5.Tip holding holes are provided on the chassis.

TO avoid blowing theO-ringout of the quick coupler, due to the high pressure in the system, never operate the pressure washer without a tip securely mounted in the quick coupler.

Figure 3

308-528 7