PT2000 PRESSURE ROLLER SYSTEM DESCRIPTION
SUCTION TUBE
PRIMING TUBE
INLET VALVE
MOTOR
ON/OFF
SWITCH
POWER SUPPLY CORD Add plug according to local code
SPRING GUARD
MUST BE AT
THIS END
ROLLER VALVE
Fig 1
Motor
The motor drives the connecting rod which moves the diaphragm.
Pressure Switch
The pressure switch at the pump outlet turns the motor on and off to control paint pressure.
Diaphragm
The diaphragm is the heart of the pump. Driven by the connecting rod and motor, the movement of the dia- phragm draws paint from the suction tube and through to the outlet valve.
Priming Valve
The priming valve assists in priming the pump during startup. Turning the priming valve counterclockwise causes the paint to drain directly back into the pail through the priming tube. Turning the knob clockwise causes the paint to flow through the fluid outlet valve and to the hose, roller valve and extension.
Outlet Valve
The outlet valve has a ball check which prevents paint from flowing backwards into the pump. This helps keep an even supply of paint to the roller each time you trigger the roller valve.
Inlet Valve
As the diaphragm draws paint from the suction tube the paint passes through the inlet valve which opens to allow paint into the pump.
PRIMING VALVE
PAINT STRAINER
7.6 M (25 FT) HOSE
460 TO 920 MM (18 TO 36 IN.)
TELESCOPING EXTENSION
LOCKNUT
ROLLER FRAME
12 MM (1/2 IN.) NAP ROLLER COVER
Outlet Hose
The hose has swivel±type couplings for easy assembly. A larger diameter outlet hose and
Roller Valve
The roller valve controls paint flow to the roller by trigger- ing it on and off.
Pressure Roller
The pressure roller has a telescoping extension and a roller cover for use on smooth surfaces. Longer exten- sions and different types of roller covers are available. See the ACCESSORIES on page 17.
307±760 3
