GROUNDING INSTRUCTIONS
mis Droduct mustbe grounded. Ifit should malfunction - | 1 | DANGER | |
or bieak down, grounding provides a path of least |
| improper connectionof the equipment- grounding | |
resistance for electric current to reduce the risk | of |
| conductor can resultIn the risk of electrocution. |
electric shock. This equipmentis equipped witha cord |
| ||
| Check with a qualified electrician or service | ||
having an | a |
| personif you arein doubtas to whether the outlet |
grounding plug. The plug must be plugged into an |
| Is properly grounded. | |
aooromiate outlet that is DroDerlv installed and |
|
| |
giunded in accordance with ail lbcal codes and |
|
|
ordinances.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
To comply with the National Electrical Code(NFPA 70) and to provide additional protection from the riskof electric shock, connect this pressure washerto circuit that is protected by a
EQUIPMENT MISUSEHAZARD
General Safety
Any misuse of the pressure washer or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and fluids,or using wom or damaged parts, can cause themto rupture andresunin fluid injection, splashing in the eyesor on the skin, or other serious bodily injury, fire, explosion or property damage.
NEVER alteror modify any part ofthis equipment;doing so could cause it to malfunction.
CHECK ail spray equipment regularly and repair or replace wom or damaged parts immediately.
ALWAYS wear protective eyewear and appropriate clothing. Ifusing a chemical injector, read andfollow the chemical manufacturer’s literature for recommendations on additional protective equipment, such as a respirator,
System Pressure
This sprayer can develophigh operating pressure. Be sure thatall spray equipment and accessories are rated to withstand the maximum working pressure of this
sprayer. DO NOT exceed the maximum working
pressure of any component or accessory usedin the . . system.
Chemical Compatibility
BE SURE that ail chemicals used in the chemical injector are compatible with the wetted parts of the hose, gun, wand andtip, as giveninthe Technical Data (inside back cover). Always read the chemical manufacturer’s literature beforeusing any chemical in this pressure washer.