LF1030 HYDRAULIC PATIENT LIFT / LF1040 ELECTRIC PATIENT LIFT OWNER'S MANUAL, 10/03
20
MAINTENANCE SCHEDULE

Note: Only qualified persons should service and repair your Lumex patient lift. Regular maintenance of

your patient lift is necessary to ensure continuing proper and safe operation. Read and observe

the following recommended maintenance schedule:

Item Inspect Inspect/ Inspect/ Inspect/
initially adjust adjust adjust
daily monthly every
6 months
Base and Casters
Ensure that base is level (all four wheels touch the floor) X X X
Ensure that caster mounting bolts and axle bolts are tight X X
Ensure that casters swivel and roll freely X X
Apply a light grease to caster ball bearings X
Base Adjustments
Ensure that base opens and closes smoothly X X X
Ensure that base locks securely in three positions X X
Ensure that locking knob is in place and operating properly X X
Inspect all base hardware for wear X
Mast
Ensure that mast is fully engaged and locked into mast sleeve X X
Inspect mast for bends or deflections X
Inspect all mast hardware for wear X X
Boom
Inspect boom for bends or deflections X X
Ensure that boom is centered between the base legs X X X
Inspect all boom hardware for wear X
Spreader Bar
Inspect hanger post for wear or damage X
Inspect sling hook for wear or deflections X X
Inspect all spreader bar hardware for wear X X
Slings
Inspect slings and straps for wear or damage X
Inspect metal/plastic parts for wear or damage X
Lubrication with light oil
Lubricate all pivot points X
Lubricate top and bottom of actuator mounting X
Cleaning
Clean with mild non-abrasive detergent X
Pump (LF1030 only)
Ensure that pump mounting hardware is tight X X
Inspect pump mounting hardware for wear X
Electronics and actuator (LF1040 only)
Ensure that battery is fully charged X X
Inspect for proper up / down operation X X
Ensure that mounting hardware is tight X X
Inspect mounting hardware for wear X