Option 42 to, Override NTP | Grandstream Networks 200 Series

	Allow DHCP		DHCP Option 42 specifies a list of IP addresses for Network Time Protocol
	Option 42 to		(NTP) servers available to the client. If you choose yes, GXP2000 will use
	override NTP		the NTP servers resolved from DHCP, instead of the one you specified in the
	server		"NTP Server" option above.


	Distinctive		Customer Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller
	Ring Tone		ID is configured, then the device will ONLY sound this ring tone when the
			incoming call is from the Caller ID, device will use System Ring Tone for all
			other calls.
			When selected but no Caller ID is configured, the selected ring tone will be
			used for all incoming calls.


	Disable Call		Default is No.
	Waiting


	Lock keypad		If this parameter is set to “Yes”, the configuration updates via keypad for
	update		Menu Item 7, 9, 12 are disabled.

Page 35

Image 35

Grandstream Networks 200 Series Option 42 to, Override NTP, Distinctive, Ring Tone, Disable Call, Waiting Lock keypad

Contents

For Firmware Version Grandstream Networks, Inc Using BUDGETONE-200 IP Phone Table of Contents Restore Factory Default Setting Appendix I Glossary of Terms Welcome Connecting Your Phone InstallationWhat is Included in the Package Warranty Safety CompliancesPage Product Overview Software Features Key Features Hardware Features Model BudgeTone-200 Hardware Specification Icon LCD Icon Definitions Using BudgeTone-200 IP PhoneGetting Familiar with LCD / LED Page Getting Familiar with Keypad Message MenuCalled Callers SEND/REDIAL Handset, Speakerphone and Headset ModeMake Calls using Numbers Making and Answering Phone Calls MENUkey 192168001020*45062 Make Calls using IP AddressAnswer an Incoming Call MENUkey 192 168 000 Call Transfer Handset Mode, Speakerphone/Headset ModeCall Hold Call Waiting and Call Flashing Attended Transfer Conference CallChecking Message and Message Waiting Indication Mute and Delete Call Features Menu Item Menu Functions Configuration GuideConfiguration with Keypad Display 7 G-711u Display 10 Phy Addr End User Configuration Configuration with Web BrowserAccess the Web Configuration Menu Daylight Grandstream Device ConfigurationStatus Basic Advanced Account Settings End User Password IP Address Time Zone DMZ IP WAN MACLAN Dhcp Dhcp IP End User PasswordDevice Mode WAN side http access LAN Dhcp Base IP PPPoE Link Up disabledProduct Model BT200 Cloned WAN MAC Addr Advanced User Configuration Status Basic Account Settings Automatic Upgrade Suppression AdminTimeout Use # as Silence Use Random UpgradeLocal RTP Port Dtmf Override NTP Disable CallUpdate Option 42 to Account Name MyCompany Authenticate IDAuthenticate Password Account Active Auto Answer SIP User ID Individual Account SettingsAccount Name SIP Server MWI Timer Enable CallFeatures Disable Missed-Call Force Invite Enable 100relSpecial Feature UAS Specify Rebooting the Phone from Remote Saving the Configuration Changes Configuration through Central Provisioning Server Upgrade through Tftp Firmware UpgradeUpgrade through Http Page Step Restore Factory Default Setting Appendix I Glossary of Terms Fqdn DNSDid DSP Dhcp Echo CancellationFXO FXS MTU HttpIP-PBX IVR Pstn NATNTP OBP/SBC TCP SDPSIP Stun VoIP Vlan

Allow DHCP

Option 42 to

override NTP

Distinctive

Ring Tone

Disable Call

Waiting

Lock keypad

update