Saving the Configuration Changes | Grandstream Networks 200 Series

5.2.4Saving the Configuration Changes

Once a change is made, the user should press the “Update” button in the Configuration Menu. The IP phone will then display the following screen to confirm that the changes have been saved:

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS ACCOUNT

Your configuration changes have been saved.

They will take effect on next reboot.

All Rights Reserved Grandstream Networks, Inc. 2004

User is recommended to power cycle the IP phone after seeing the above message.

5.2.5Rebooting the Phone from Remote

The administrator of the phone can remotely reboot the phone by pressing the “Reboot” button at the bottom of the configuration menu. Once done, the following screen will be displayed to indicate that rebooting is underway.

Grandstream Device Configuration

The device is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

All Rights Reserved Grandstream Networks, Inc. 2004

At this point, user can relogin to the phone after waiting for about 30 seconds.

42

Image 42

Grandstream Networks 200 Series user manual Saving the Configuration Changes, Rebooting the Phone from Remote

Contents

Grandstream Networks, Inc For Firmware Version Table of Contents Using BUDGETONE-200 IP Phone Restore Factory Default Setting Appendix I Glossary of Terms Welcome Installation What is Included in the PackageConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software Features Hardware Features Hardware Specification Model BudgeTone-200 Using BudgeTone-200 IP Phone Getting Familiar with LCD / LEDIcon LCD Icon Definitions Page Getting Familiar with Keypad Callers MenuCalled Message Making and Answering Phone Calls Handset, Speakerphone and Headset ModeMake Calls using Numbers SEND/REDIAL MENUkey 192 168 000 Make Calls using IP AddressAnswer an Incoming Call MENUkey 192168001020*45062 Call Waiting and Call Flashing Handset Mode, Speakerphone/Headset ModeCall Hold Call Transfer Conference Call Checking Message and Message Waiting IndicationAttended Transfer Call Features Mute and Delete Configuration Guide Configuration with KeypadMenu Item Menu Functions Display 7 G-711u Display 10 Phy Addr Configuration with Web Browser Access the Web Configuration MenuEnd User Configuration End User Password IP Address Time Zone Grandstream Device ConfigurationStatus Basic Advanced Account Settings Daylight Dhcp IP WAN MACLAN Dhcp DMZ IP WAN side http access PasswordDevice Mode End User Cloned WAN MAC Addr PPPoE Link Up disabledProduct Model BT200 LAN Dhcp Base IP Advanced User Configuration Account Settings Status Basic Automatic Upgrade Silence AdminTimeout Use # as Suppression Port UpgradeLocal RTP Use Random Dtmf Option 42 to Disable CallUpdate Override NTP Account Active Authenticate IDAuthenticate Password Account Name MyCompany Auto Answer SIP Server Individual Account SettingsAccount Name SIP User ID MWI Disable Missed-Call Enable CallFeatures Timer UAS Specify Enable 100relSpecial Feature Force Invite Saving the Configuration Changes Rebooting the Phone from Remote Configuration through Central Provisioning Server Firmware Upgrade Upgrade through HttpUpgrade through Tftp Page Restore Factory Default Setting Step Appendix I Glossary of Terms DSP DNSDid Fqdn FXS Echo CancellationFXO Dhcp IVR HttpIP-PBX MTU OBP/SBC NATNTP Pstn Stun SDPSIP TCP Vlan VoIP