| Local RTP |
| This parameter defines the local |
|
| port |
| will listen and transmit. It is the base RTP port for channel 0. When |
|
|
|
| configured, channel 0 will use this port _value for RTP and the port_value+1 |
|
|
|
| for its RTCP; channel 1 will use port_value+2 for RTP and port_value+3 for |
|
|
|
| its RTCP. The default value is 5004. |
|
|
|
|
|
|
|
|
|
|
|
| Use Random |
| This parameter, when set to Yes, will force random generation of both the |
|
| Port |
| local SIP and RTP ports. This is usually necessary when multiple |
|
|
|
| BudgeTone 200s are behind the same NAT. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| This parameter specifies how often the BudgeTone 200 sends a blank UDP |
|
| interval |
| packet to the SIP server in order to keep the “hole” on the NAT open. |
|
|
|
| Default is 20 seconds. |
|
|
|
|
|
|
|
|
|
|
|
| Use NAT IP |
| NAT IP address used in SIP/SDP message. Default is blank. |
|
|
|
|
|
|
|
|
|
|
|
| STUN Server |
| IP address or Domain name of the STUN server. |
|
|
|
|
|
|
|
|
|
|
|
| Firmware |
| This radio button will enable BudgeTone 200 to download firmware or |
|
| Upgrade and |
| configuration file through either TFTP or HTTP. |
|
| provisioning |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Via TFTP |
| This is the IP address of the configured TFTP server. If selected and it is |
|
| Server |
|
| |
|
|
| configuration file or new code image from the specified TFTP server at boot |
|
|
|
| time. It will make up to 3 attempts before timeout and then it will start the |
|
|
|
| boot process using the existing code image in the Flash memory. If a TFTP |
|
|
|
| server is configured and a new code image is retrieved, the new downloaded |
|
|
|
| image will be verified and then saved into the Flash memory. |
|
|
|
| Note: Please do NOT interrupt the TFTP upgrade process (especially the |
|
|
|
| power supply) as this will damage the device. Depending on the network |
|
|
|
| environment this process can take up to 15 or 20 minutes. |
|
|
|
|
|
|
|
|
|
|
|
| Via HTTP |
| The URL for the HTTP server used for firmware upgrade and configuration |
|
| Server |
| via HTTP. For example, |
|
|
|
| http://provisioning.mycompany.com:6688/Grandstream/1.0.5.16 |
|
|
|
| Here “:6688” is the specific TCP port that the HTTP server is listening at, it |
|
|
|
| can be omitted if using default port 80. |
|
|
|
| Note: If Auto Upgrade is set to No, BudgeTone 200 will only do HTTP |
|
|
|
| download once at boot up. |
|
|
|
|
|
|
|
|
|
|
|
| Allow DHCP |
| DHCP Option 66 is used to identify a TFTP server when the 'sname' field in |
|
| Option 66 to |
| the DHCP header has been used for DHCP options. If you choose yes, |
|
| override |
| GXP2000 will use the TFTP server resolved from DHCP, instead of the one |
|
| server |
| you specified in the "TFTP Server" option above. |
|
|
|
|
|
|
33
