Manuals / Grandstream Networks / Computer Equipment / Modem

Grandstream Networks Configuration Guide, Configuring the HT502 through Voice Prompts

Models: HT502

1 32

Download 32 pages 45.16 Kb

Page 14

CONFIGURATION GUIDE

Configuring the HT502 through Voice Prompts

DHCP MODE

Select voice menu option 01 to enable HT502 to use DHCP.

STATIC IP MODE

Select voice menu option 01 to enable HT502 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options: 1) always check, 2) check when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

Grandstream Networks, Inc.	HT-502 User Manual	Page 14 of 32
	Firmware Version 1.0.4.2	Last Updated: 06/2011

Image 14

Grandstream Networks user manual Configuration Guide, Configuring the HT502 through Voice Prompts

Contents

Grandstream Networks, Inc NAT Settings Configuration GUI Interface Examples Welcome Safety CompliancesWarranty Equipment Packaging Connecting the HT502Connect Your HT502 LAN LED Power LEDWAN LED PHONE1 / PHONE2 LEDSoftware Features Overview Product OverviewLED Hardware SpecificationEMC Understanding HT502 Voice Prompt Reset the HT to take affect the new IP addressBasic Operations Main MenuPlacing a Phone Call Using IVRSee Restore Factory Default Setting section ExamplesCall Transfer Call HoldCall Waiting Attended Transfer Way ConferencingFax Support Instructions for 3-way conferenceCall Features Key Call FeaturesConfiguration Guide Configuring the HT502 through Voice PromptsConfiguring the HT502 Via Web Browser User Level Password Web pages allowedImportant Settings Dtmf MethodsMTZ+6MDT+5 DMZ IP NAT FXS1 Advanced User ConfigurationDND FXS2HTTP/HTTPS Internet Telephone Service Provider ACS URLAuthenticate Password ConfigurationAuthenticate ID Syslog LevelEnable Ring-Transfer DNS ModeUnregister on Reboot Disable Bellcore StyleEnable Call Features SIP T1 TimeoutDisable Dtmf Disable Call WaitingDial Plan Dial Plan Rules Dial Plan PrefixUse # as Dial Key 1900x. =16172-9xxxxxx 12-9xx2-9xxxxxx 0112-9xCallee Request Timer Special FeatureCaller Request Timer Force TimerVAD Configuration through a Central Server Saving the Configuration ChangesRebooting the HT502 from Remote Instructions for local firmware upgrade Software UpgradeFirmware Upgrade through TFTP/HTTP/HTTPS Managing Firmware and Configuration File Download Configuration File DownloadFirmware and Configuration File Prefix and Postfix Restore Factory Default Setting Encode the MAC Address