Grandstream Networks user manual Connect Your HT502, Equipment Packaging, Connecting the HT502

CONNECT YOUR HT502

Equipment Packaging

The HT502 ATA package contains:

•One HT502 Main Case

•One Universal Power Adaptor

•One Ethernet Cable

•One HT502 Vertical Stand

Connecting the HT502

The HT502 is designed for easy configuration and easy installation. Configure the HT502 following the directions in the Configuration section of this manual.

1.Connect a standard touch-tone analog telephone to the PHONE port.

2.Insert a standard RJ11 telephone cable into the Phone1 port and connect the other end of the telephone cable to the analog telephone.

3.Insert the Ethernet cable into the WAN port of HT502 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.)

4.Connect a PC to the LAN port of HT502 if it is being used as a router.

5.Insert the power adapter into the HT502 and connect it to a wall outlet.

The HT502 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HT502 VoIP features and functions are available using a regular analog telephone.

Figure 1: Connecting the HT502

HT-502	HT-502
Front View	Back View

Display LEDs	RJ-45 Ports Reset	Power	RJ-11 FXS Ports
(green)	10/100 Mbps	Supply	(Phone)
		(12V)

The HT502 has two FXS port. Both FXS ports can have a separate SIP account. This is a key feature of HT502 as it supports simultaneous calls on both FXS ports.

Grandstream Networks, Inc.	HT-502 User Manual	Page 5 of 32
	Firmware Version 1.0.4.2	Last Updated: 06/2011