![](/images/new-backgrounds/1010201/102019x1.webp)
Burner, Blower and Control Center Section
The burner section, blower section and control center of the unit are all combined into one assembly which is installed in the field on top of the filter and stand section. The burner section is the lowest part of the burner / blower unit and it sits directly on the filter assembly. The burner section contains the gas train with its own access door and directly above that is the control center door. A number of different options are available for the gas train, whick include type, size and location of burners and many different ignition and safety controls.
The blower section of the unit consists of one motor and either one or two forward curved blowers. It is the top- most assembly in the unit. If two blowers are used, their drive shafts are connected and driven by a single motor. Supply air discharge openings may be located either on the side wall of the unit for horizontal discharge, or may be configured for upblast discharge through the roof of the unit. One large access door is located directly above the control center, for inspection and maintenance of the motor and blower(s).
Blowers
Control Center/
Gas Train
Burner
Filters
Open View
Model VSU
®