| Document #474680 |
| Model SP |
® | Model CSP |
| Ceiling Exhaust and Inline Fans |
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
Model SP
Model SP is a direct drive ceiling exhaust fan designed for clean air applications where low sound levels are required. Many options and accessories are available such as lights, motion detectors, ceiling radiation dampers and speed controls. Capacities range from 25 to 1,600 cfm (42 to 2,718 m3/hr) and 1 in. wg (248 Pa). AMCA Licensed for Sound and Air Performance.
ENERGY STAR® Certified models include:
Model CSP
Model CSP is a direct drive inline exhaust fan designed for clean air applications where low sound levels are required. Capacities range from 70 to 3,800 cfm (119 to 6,456 m3/hr) and 1 in. wg (248 Pa). AMCA Licensed for Air Performance.
WARNING!
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
•Suitable for use with solid state speed controls.
•Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
•Before servicing or cleaning unit, switch power off at service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
•Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including
•Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.
•When cutting or drilling into wall or ceiling, do not damage electrical wiring or other hidden utilities.
•Acceptable for use over a bathtub or shower when installed in a GFCI protected branch circuit. (Up through size
•Never place a switch where it can be reached from a tub or shower.
•Ducted fans must always be vented to the outdoors.
•These fans are not recommended for cooking exhaust applications. They are designed primarily for low temperature, clean air applications only. The diagram shows the minimum distance these fans should be placed in relation to cooking equipment.
•Fan/Light combination not to be installed in a ceiling thermally insulated to a value greater than R40.
CAUTION!
•For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
Ceiling Exhaust and Inline Fans 1
®
