INSTALLATION

Shipment Transit

1.The freezer has been operated and tested at the factory. Upon arrival the complete freezer must be thoroughly checked for any damage which may have occurred in transit.

Note: A Tip (N) Tell warning device is placed on each shipping carton at the factory. If the indicator is red, the carton has been tipped in transit. (See Figure B)

2.THE CARRIER IS RESPONSIBLE FOR ALL DAMAGE IN TRANSIT WHETHER VISIBLE OR CONCEALED. DO NOT PAY THE FREIGHT BILL until the freezer has been checked for damage. Have the carrier note any visible damage on the freight bill. If concealed damage and/or shortages are found later, advise the carrier within 10 days and request inspection. The customer must place any claim for damage and/or shortage with the carrier. Grindmaster cannot make any claims against the carrier.

Installing Your Unit

1.Place the self-sealing rubber pad (shipped with the freezer) on a level counter that is stable and strong enough to safely support the freezer’s weight (245 lbs / 111 kg), or if equipped with legs instead of pad, install legs by screwing them into the four leg holes on the bottom of the unit. (Leg Kit Part # W0890220 (4) 4” Legs)

2.Make sure freezer is to be placed in a location that is within 6’ of a properly grounded circuit and allows adequate space at each side and above for proper air circulation. Air Cooled Units Only: Minimum clearance is 6” (15 cm) on both sides and 0” at back and open above the freezer. (See Figure C)

NOTE: Failure to allow adequate ventilation will void the warranty and reduce freezer performance.

NOTE: Locating the unit in high ambient temperatures (over 100°F / 37.8°C) will significantly reduce the performance of your machine.

3.Remove the side panels and supporting all four sides, lift machine up (by the frame) and place in appropriate area on top of rubber pad.

Figure B

Figure C

!

!

CAUTION: If equipped with spinner do not lift unit up by spinner shaft. It will cause serious damage to spinner.

CAUTION: Beverage freezers are heavy pieces of equipment. It is recommended that moving or lifting the unit be done by two people to

avoid injury.

Figure D

4.The side panels should still be removed. Cut the cable tie on each motor used to secure motor during shipment. Make sure motors rock freely. (Figure D)

5.220V/50Hz Units: These units come with a plugless cord that requires the appropriate plug configuration be connected. This must be determined by the power outlets at the specified location. See wiring diagram at back of manual for assistance. It is recommended that a service technician performs this operation.

Page 4

Model 3312

 

 

Page 6
Image 6
Grindmaster 3311 manual Installation, Shipment Transit

3311 specifications

The Grindmaster 3311 is a highly regarded coffee grinder designed specifically for commercial use, particularly popular among coffee shops and cafes for its reliability and efficiency. Its robust construction ensures longevity, making it a preferred choice for businesses that require consistent performance to meet high customer demand.

One of the main features of the Grindmaster 3311 is its powerful grinding mechanism. It utilizes high-quality burrs that deliver a uniform grind size, which is essential for brewing an exceptional cup of coffee. This grinder is designed to handle a wide variety of coffee beans, allowing establishments to explore diverse coffee offerings without compromising on quality.

Another standout characteristic of the Grindmaster 3311 is its intuitive user interface. The grinder typically integrates a digital display, which aids in easy operation and allows users to select grind sizes with precision. This level of control is essential for coffee aficionados who understand that even minor adjustments in grind size can significantly influence the flavor profile of the brewed coffee.

In terms of technology, the Grindmaster 3311 often comes equipped with advanced grinding settings, allowing users to customize their grind based on specific brewing methods, whether it be for espresso, French press, or drip brewing. The dual hopper design is also an advantage, permitting users to switch between two different types of beans easily, thus offering flexibility depending on customer preference.

Additionally, the Grindmaster 3311 prides itself on quiet operation, utilizing sound-dampening technologies that minimize noise, creating a pleasant environment for both baristas and customers alike. Maintenance is also made simple, with easy access to the burrs for routine cleaning, ensuring consistent performance over time.

Energy efficiency is yet another characteristic that sets the Grindmaster 3311 apart. By utilizing innovative motor technology, this grinder reduces energy consumption without sacrificing performance, aligning with the growing trend toward sustainability in commercial operations.

In summary, the Grindmaster 3311 embodies excellence in commercial coffee grinding equipment. Its focus on grind quality, user-friendly technology, dual functionality, and energy efficiency makes it an invaluable asset to any coffee business dedicated to providing exceptional beverages to its customers.