Grindmaster P400ESHP instruction manual Service, Weekly or Bi-Weekly, Depending on Use

Weekly or Bi-Weekly, Depending on Use

1)Fill shuttles with one gallon, 2/3 full, of hot water.

2)Pour into the shuttle liners the recommended concentration of urn cleaner (excessive amounts of cleaner will attack the stainless steel).

Urn cleaners that have been used successfully:

DIP-IT, manufactured by Economics Laboratories, Inc. 4 Corporate Park Drive

White Plains, NY 10604

OXYLITE, manufactured by Avril, Inc., Syndet Division 601 N. Third Street

Reading, PA 19601

3)Scrub the liner interior with a plastic bristle brush.

4)Remove the knurled nut at the top of the gauge glass and clean the glass with a small bottle brush.

5)Pour out the contents of the shuttle.

6)Remove the handle assembly of the shuttle faucet by unscrewing the plastic bonnet.

7)Gently wash the faucet seat cup with a soft cloth and warm soapy water.

8)Wash the faucet shank with a bottle brush.

9)Soak airpot pick-up tube assembly in hot soapy water. Urn cleaner may be used for stronger cleaning.

10)Clean the warmer and bottom of shuttle surfaces. These surfaces must be clean for proper heat transfer.

11)Polish the exterior of the brewer with stainless steel cleaner. Use the appropriate cleaner for brass, copper, or vinyl if these optional finishes are provided.

Service

The rest of this manual contains information to aid the service person who is working on this equipment. This page has information on performing common service tasks. Following this is the Troubleshooting section which can help diagnose problems which are divided into three basic systems: filling, heating, and brewing.

Next is an illustrated parts breakdown which will help in the selection of repair parts. If further assistance is needed, call our Technical Service Department at (502) 425-2776or 800-695-4500(USA & Canada only) Monday -Friday between 8:00 am and 8:00 pm EST.

Wiring diagrams are also provided. Locate the basic diagram for the model you are working with. If there are any options, see Diagram #091-548 (page 31 of this manual) which shows the wiring alterations for Shuttle Brewer & Airpot/Shuttle Brewer options.

Shuttle Brewers & Airpot/Shuttle Brewers Page 10