Grizzly G0460/G0461 owner manual Crosscut Fence, To install the crosscut fence

2.Slide the lock plate into the T-slot in the side of the sliding table.

3.With the help of an assistant, place the crosscut table on the pivot pin of the swing arm and over the studs of the lock plate (see Figure 43).

Crosscut

Table Leg

Pivot Pin

T-Slot

Figure 43. Installing the crosscut table.

4.Lock the crosscut table in place with the adjustable handles.

Crosscut Fence
Components and Hardware Needed:	Qty
Crosscut Aluminium Fence	1
Long Knobs M10-1.5	2
Flip Stops	2
To install the crosscut fence:

1.Insert the T-bolts in the areas indicated in Figure 44, depending on whether or not you want the crosscut fence in the forward or rear position. (Refer to Page 36 for more details.)

G0460/G0461 12" Sliding Table Saw

Forward

Mounting Points

Rear Mounting

Points

Crosscut Fence

Knobs

Figure 44. Crosscut fence mounting.

2.Place a framing square along the edge of the sliding table and use the crosscut fence adjustment screw (Figure 45) to align the fence perpendicular to the sliding table.

Note: Refer the instructions on Page 47 for additional details on making the fence per- pendicular.

Figure 45. Crosscut fence adjustment screw.

-29-