Additional Safety Instructions for Metal
Cutting Bandsaws
1.BLADE CONDITION. Do not operate with dull, cracked or badly worn blade. Inspect blades for cracks and missing teeth before each use.
2.HAND PLACEMENT. Never position fin- gers or thumbs in line with the cut. Hands could be crushed in vise or by falling machine components or cut by the blade.
3.ENTANGLEMENT HAZARDS. Do not operate this bandsaw without blade guard in place. Otherwise, loose clothing, jewelry, long hair and work gloves can be drawn into working parts.
4.BLADE REPLACEMENT. When replacing blades, make sure teeth face toward the workpiece. Wear gloves to protect hands and safety glasses to protect eyes.
5.WORKPIECE HANDLING. Always sup- port the workpiece with table, vise, or other support fixture. Flag long pieces to avoid a tripping hazard. Never hold the workpiece with your hands during a cut.
6.LOSS OF STABILITY. Unsupported workpieces may jeopardize machine sta- bility and cause the machine to tip and fall, which could cause serious injury.
7.POWER INTERRUPTION. Unplug machine after power interruption. Machines without magnetic switches can start up after power is restored.
8.ATTENTION TO WORK AREA. Never leave a machine running and unattended. Pay attention to the actions of others in the area to avoid unintended accidents.
9.MAINTENANCE/SERVICE. All inspec- tions, adjustments, and maintenance are to be done with the machine OFF and the power disconnected to the machine. Wait for all moving parts to come to a complete stop.
10.HEARING PROTECTION & HAZARDS. Noise generated by blade and workpiece vibration, material handling, and power transmission can cause permanent hear- ing loss over time and interfere with com- munication and audible signals. Always wear hearing protection.
11.HOT SURFACES. Due to friction, the workpiece, chips, and some machine com- ponents can be hot enough to burn you.
12.STARTING POSITION. Never turn the saw ON with the blade resting on the workpiece.
13.EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties performing the intended operation, stop using the machine! Contact our Technical Support Department at (570)
No list of safety guidelines can be complete. Every shop environment is different. Like all machines there is danger associated with the Model G0622. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
G0622 4" X 6" Metal Cutting Bandsaw |
