Grizzly G0637, G0638 owner manual Inventory, Notice

Inventory

Inventory

After all the parts have been removed from the boxes, you should have the following items:

Inventory: (Figures 5–8)		Qty
A.	Upper Stand Braces	4
B.	Upper Stand Legs	4
C.	Filter Brace Supports (Long)	2
D.	Control Box Bracket	1
E.	Cyclone Mounting Brackets	4
F.	Lower Stand Legs	4
G.	Filter L-Braces	2
H.	Filter Brace Support (Short)	1
I.	Lower Stand Braces	4
J.	Intake Cylinder	1
K.	Outlet Port	1
L.	Cyclone Funnel (Large)	1
M.	Intake Barrel	1
N.	Cyclone Funnel (Small)	1
O.	Funnel Port	1
P.	Blower Housing with Motor	1
Q.	Control Box	1
R.	Bag Holder Panels	8
S.	Remote Control	1
T.	Collection Drum Lid Latches	6
U.	Casters 2"	8
V.	Collection Drum Lids	2
W.	Upper Collection Drum Cylinders	2
X.	Collection Drum Clamps	2
Y.	Lower Collection Drum Cylinders	2
Z.	Flexible Ducts 9" x 251⁄2"	2
AA. Noise Mufflers		2
BB. Canister Filters
	—Model G0637 510 x 1200mm	2
	—Model G0638 510 x 1500mm	2
CC. Flexible Ducts 8" x 311⁄2"		2
DD. Flexible Ducts 8" x 43⁄4"		2
EE. Canister Filter Bag Clamps		2

Inventory (continued)	Qty
HH. Duct Clamps 8" (not shown)	8
II. Duct Clamps 9" (not shown)	4
JJ. Collection Bags (not shown):
—Collection Drums 640 x 1200mm	10
—Canister Filters 510 x 600mm	2
KK. Hardware (not shown):
—Hex Bolts 1⁄4"-20 x 5⁄8"	8
—Hex Bolts 3⁄8"-16 x 3⁄4"	72
—Hex Bolts 5⁄16"-18 x 3⁄4"	24
—Hex Bolts 5⁄16"-18 x 1"	10
—Hex Bolts 5⁄16"-18 x 11⁄4"	35
—Hex Bolts 5⁄16"-18 x 3"	2
—Phillips Head Screws #10-24 x 3⁄8"	72
—Fender Washers 5⁄16"	8
—Flat Washers 1⁄4"	16
—Flat Washers 3⁄8"	152
—Flat Washers 5⁄16"	106
—Lock Washers 3⁄8"	8
—Hex Nuts 1⁄4"-20	8
—Hex Nuts 3⁄8"-16	16
—Hex Nuts 5⁄16"-18	47
—Hex Nuts #10-24	72
—Lock Nuts 3⁄8"-16	64
—G0638 (For Control Box Bracket)
Phillips Head Screws M6-1 x 15	4
Flat Washers 6mm	4
Hex Nuts M6-1	4
LL. Rubber Handles (not shown)
(For Bag Holders)	4

NOTICE

Some hardware/fasteners and gaskets on the inventory list may arrive pre-installed. Check mounting locations before assuming that any items from the inventory list are missing.

FF. Gaskets (not shown):
—Intake Cylinder 3 x 6 x 1800mm	1
—Outlet Port 3 x 6 x 1100mm	1
—Cyclone Funnel (Large)
3 x 6 x 2500mm	1
—Intake Barrel 3 x 6 x 2500mm	1
—Cyclone Funnel (Small)
3 x 6 x 2200mm	1
—Funnel Port 3 x 6 x 735mm	1
—Collection Drum Lids
10 x 50 x 2000mm	2

A

D

E

B

F

C

I

G

H

GG.Rubber Mounting Gaskets (not shown):

—Filter Canisters 4

-14-

Figure 5. Model G0637/G0638 inventory A–I.

G0637/G0638 Cyclone Dust Collector