![System Grounding](/images/new-backgrounds/39843/3984371x1.webp)
Note: When calculating static pressure loss to determine if multiple lines can be left open at the same time, only include the main line numbers once.
5.Compare the total static pressure loss for that line to the maximum static pressure rating of your dust collector (refer to the Machine Data Sheets on Pages 3 & 5).
2)reducing amount of flexible duct used,
3)increasing machine dust port size, 4) moving machine closer to dust collector to eliminate duct length, and 5) reducing 90˚ elbows or replacing them with 45˚ elbows.
System Grounding
Since plastic hose is abundant, relatively inex- pensive, easily assembled and air tight, it is a very popular material for conveying dust from woodworking machines to the dust collector. We recommend using flexible hose
To protect against static electrical build up inside
a
If you connect the dust collector to more than one machine by way of a
Be sure that you extend the bare copper wire down all branches of the system. Do not forget to connect the wires to each other with wire nuts when two branches meet at a “Y” or “T” connec- tion.
G0637/G0638 Cyclone Dust Collector