SECTION 4: OPERATIONS
Operation Safety |
| Basic Controls |
|
|
|
|
|
|
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear a face shield, respirator, and hearing protection when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Use the descriptions and figures below to become familiar with the basic controls of your lathe.
Lathe ON/OFF Switch: Turns power ON/OFF to the lathe motor, which rotates the spindle.
Speed Adjust Knob: Adjusts the speed of the spindle within the current belt position speed range.
RPM Display: Displays the spindle speed in revo- lutions per minute (RPM).
Speed Display |
ON/OFF Switch |
Speed Adjust Knob |
Figure 13. Control Panel.
G0657/G0658 Benchtop Lathe |
