ACCESSORIES
SECTION 5: ACCESSORIES
G1194—3-Jaw Chuck
A "must have" for the serious wood turner. This 3-jaw chuck is a self-centering style chuck used mostly for round work. All three jaws tighten together at the same time. Jaws are reversible for expanded work holding capacity. Threaded insert required for mounting!
H7828—Tool Table Plus
The new Tool Table Plus was designed in response to customer requests for a slightly wider and taller table to accommodate small planers, wood lathes, sanders and a variety of other bench-top machines.
Figure 42. Model G1194 3-Jaw Chuck.
G1082—4-Jaw Chuck
Another "must have" for the serious wood turner. This 4-jaw chuck is an independent type chuck that is used for square and odd-shaped pieces. Each jaw tightens individually and can be turned around to hold larger dimension workpieces. Threaded insert required for mounting!
Figure 44. Model H7828 Tool Table Plus.
H6542—Robert Sorby HSS 8-PC Turning Set G1676—Drill Chuck Arbor MT#2 x JT#3 H6204—Precision Drill Chuck 1⁄32"–5⁄8" x JT#3 H3102, H3103, H3104—Gouge Slipstones H1064—6-PC Deluxe HSS Lathe Chisel Set G9863—8-PC HSS Lathe Chisel Set H0507—20" Swan Neck Hollowing Tool H0508—24" Swan Neck Hollowing Tool
Figure 43. Model G1082 4-Jaw Chuck.
G3163—1" x 8 TPI RH Threaded Insert.
This threaded insert is required to mount a 3- or 4-jaw chuck to your wood lathe.
-28-
Figure 45. Model H6542 Robert Sorby 8-PC Set.
G0657/G0658 Benchtop Lathe
