-12- model g0719 (mfg. since 10/10)
inventory
The following is a description of the main compo -
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
figure 3. inventory.
A
B
C
d
e
F
g
hiJ
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes par ts are
pre-installed for shipping, or they become
hidden by packaging materials.
Main inventory (figure 3) Qty
a. sander Assembly ........................................1
B. left side panel ...........................................1
C. right side panel ..........................................1
D. Upper shelf 163⁄4" x 153⁄8" ............................1
E. lower shelf 16" x 183⁄8" ...............................1
f. rear panel...................................................1
G. panel and door Assembly ...........................1
h. miter gauge Assembly ................................1
i. Wrench 10 x 13 ...........................................1
J. B olt Bag ....................................................... 1
—Flat Washers 5⁄16" ................................. 4
—hex Bolts m8-1.25 x 45 ..........................4
—hex Nuts 3⁄8"-16 .....................................4
—Feet .........................................................4
—Flange Bolts m6-1 x 12 ...........................8
—Carriage Bolts 5⁄16"-18 x 3⁄4" .................8
—Flange Nuts 5⁄16"-18 ..............................8
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials unpacked with this
machine. Discard immediately.