-22- model g0719 (mfg. since 10/10)
sECtiOn 6: MaintEnanCE
always disconnect power
to th e machin e befo re
performing maintenance.
failure to do this may
result in serious person-
al in jury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily:
• loose mounting bolts.
• Worn, loose, or damaged sanding disc.
• Worn or damaged power cord.
• Any other condition that could hamper the
safe operation of this machine.
• Wipe off the sawdust build-up from the table
surface.
Weekly Maintenance:
• Vacuum out dust from the motor fan area and
from around the base of the machine.
Monthly:
• repeat test run to ensure all safety fea-
tures are working correctly.
Long-term storage:
• Keep unpainted surfaces rust free with heavy-
duty rust prevention compound.

schedule

Cleaning the mo del g0719 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. if any
resin has built up, use a resin dissolving cleaner
to remove it. treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning and
periodically after use.

Cleaning

protect the unpainted c ast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like g96® gun treatment, slipit®, or
Boeshield® t-9 (see section 5: accessories on
page 21 for more details).

unpainted Cast iron

Lubrication

this machine uses permanently lubricated ball
bearings. No bearing maintenance is required.
periodically apply a drop of oil to each of the table
pivot bolts.