Speed Changes
The G1006/G1007 is capable of twelve different speed settings. Different types of cuts and types of materials require varying speeds. Consult outside sources for information about appropriate speeds for different applications.
To change speeds:
1.Loosen the motor locking lever. It is located on the right side of the machine, near the back. Pull the motor inward to move the rear pulley toward the spindle.
2.Loosen the two bolts that hold the center pulley system in place, so the pulley will float.
3.With the center and rear pulleys loose, move the
4.Push the motor back to tighten the rear V- Belt and tighten the motor locking lever.
5.Tighten the bolts holding the center pulley in place.
Head Height
The head height on this Mill/Drill can be adjusted for various applications.
To adjust the head height:
1.Loosen the two head locking nuts located on the right side of the head near the back.
Use the lug wrench provided.
2.Use the head crank to move the head up or down according to your needs.
3.Tighten the two head locking nuts.
G1006/G1007 Mill/Drill |