Unpacking

 

Piece Inventory

 

 

 

 

 

 

This Milling/Drilling Machine is shipped from the manufacturer in a carefully packed crate. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assistance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

The G1006/G1007 is a heavy machine (670 lbs. shipping weight). DO NOT over-exert yourself while unpacking or moving your machine – get assistance. In the event that your machine must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine. Serious personal injury may occur.

When you are completely satisfied with the condition of your shipment, you should inventory its parts.

Most of the G1006/G1007 has been pre-assembled at the factory. Therefore, there are very few loose parts.

You will find the following parts accompanying the G1006/G1007:

•Drilling Angle Vise

•Feed Levers with Knobs (3)

•Handwheels w/Handles (3)

•Lug Wrench

•Drill Chuck w/Key

•Drill Chuck Arbor (installed)

•Fly Cutter

•R-8 Arbor

•Cap Screw w/Washer

•Head Crank w/Handle

In addition to the parts listed above, the G1007 comes with the power feed and its attachment accessories.

If anything is missing, call or write to the service department listed in the previous Section.

NOTICE

A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.

-9-

 

 

 

 

 

 

 

 

 

 

G1006/G1007 Mill/Drill