Cleanout Door |
| Motor Brace |
|
|
|
|
|
|
The Model G1023S Series comes with a cleanout door that can accept the optional Model G1838 4" dust hood. Mount the cleanout door into the square hole on the lower left side of the saw base as shown in Figure 11a.
A red motor brace has been installed for shipping purposes. Remove this brace before continuing with assembly. The bolts that secure the brace should be screwed back in at the locations from which they came.
Cleanout Door
Figure 11a. Installed cleanout door.
Motor Brace
Installed For
Shipping Only!
Figure 11b. Motor brace.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G1023S Series | ||||||
