5.Moving the arbor bracket moves the V-belts and pulleys out of alignment, so adjustment of the motor pulley is required. Simply loosen the setscrew in the middle motor groove pul- ley and slowly slide the pulley towards the end of the motor shaft. Once the V-belts are back in alignment, tighten the setscrew securely.

6.Re-attach the table, making sure there is adequate blade clearance through all blade adjustments. Recheck guard alignment to the blade and to the table top. Adjust as nec- essary and tighten down all the bolts before use.

7.If the blade is still contacting the insert, repeat Steps 1-6. Check all other adjust- ments.

8.Recheck the blade to miter slot adjustments, and adjust as necessary.

 

 

 

 

 

 

 

 

 

 

 

 

G1023S Series Heavy-Duty 10'' Table Saw

-43-

Page 44 Page 46
Page 45
Image 45
Grizzly G1023S110 instruction manual
Page 44 Page 46
Top Page Image Contents