Manuals / Grizzly / Power Tools / Saw

Grizzly G1067Z instruction manual Live Center Speed Selector

Models: G1067Z

1 28
Download 28 pages 24.13 Kb
Page 15
Image 15

Live Center

Speed Selector

A #2 Morse taper live center is supplied with the lathe and is preinstalled from the factory. Figure

18.To remove it:

1.Turn the handwheel counter-clockwise until the tailstock barrel bottoms out in the tail- stock housing. This causes the center to be forced out of the barrel.

2.Reinstall by turning the handwheel clockwise until the tailstock barrel sticks out of the tail- stock housing about 1⁄2''. Insert the live cen- ter back into the tailstock barrel.

(1)The tailstock barrel lock handle must always be locked down while the lathe is in use. Figure 18. The workpiece can be thrown from the lathe if this step is not observed. (2) The tailstock barrel should not protrude from the tailstock housing more than 2''. Serious personal injury may occur.

Lock handle

Figure 18.

The lathe must be running to change speeds. Before turning the lathe on, read Safety Rules and Test Run in the Operations Section, page 15 and 16.

The variable speed selector has six position set- tings. These settings provide speeds of 500, 800, 1200, 1600, 2000 and 2700 RPM for varied appli- cations. To change speeds:

1.Turn the lathe on.

2.Pull the speed selector lever straight back away from the machine so the detent spring compresses. Figure 19.

3.Slowly shift the lever to the desired speed.

4.Make sure the lever is set in the detent for the desired speed. The lever should click into position.

Remember to choose the correct speed for your particular turning project. As a gener- al rule, the larger the workpiece diameter, the slower the speed. Always start on slow speed.

Speed selector

Figure 19.

 

 

 

 

 

 

 

 

-14-

 

 

G1067Z Wood Lathe

 

 

Page 14 Page 16
Page 15
Image 15
Grizzly G1067Z instruction manual Live Center Speed Selector
Page 14 Page 16

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.