SECTION 4: OPERATIONS

Safety Rules For Wood Lathes

Always wear ANSI-approved safety glasses or goggles and hearing protection when operating equipment — particularly when testing new tools or machinery. Do not allow visitors into your workshop when testing or operating equipment. Serious personal injury may occur.

The Model G1067Z is capable of causing seri- ous personal injury if used in a reckless man- ner. Please follow the previously-mentioned safety rules for all tools, as well as these safety guidelines for Wood Lathes:

1.Observe all electrical requirements such as fuse sizing, wire sizing, grounding and any other electrical consideration.

2.Ensure that all guards are in place and that the Wood Lathe sets on a flat, stable sur- face.

3.Always wear eye protection when operat- ing a Wood Lathe. Use a respirator to avoid inhaling dust. All safety equipment should be ANSI approved.

4.Always observe the condition of the mate- rials you are turning. Pay particular atten- tion to knots, splits and other potentially dangerous conditions.

5.Never operate the lathe with damaged or worn parts.

6.Maintain your lathe in proper working con- dition. Perform routine inspections and maintenance promptly when called for. Put away adjustment tools after use.

7.Make sure your Wood Lathe is turned off, disconnected from its power source and all moving parts have come to a complete stop before starting any inspection, adjust- ment, or maintenance procedure.

8.Allow the lathe to gain its full speed before beginning turning.

9.Do not leave lathe running unattended for any reason.

10.Do not stop lathe by putting your hand against the workpiece.

11.Discourage visitors, particularly children, from your work area while you are working. If visitors must be in your shop while you work, make sure that they are provided with ANSI-approved safety protection.

12.Remove indexing pin before turning lathe on.

13.Test your tool rest clearance by rotating workpiece by hand before turning lathe on.

14.When face plate turning, use lathe chisels on the downward spinning side of the workpiece only.

15.Always support lathe chisels on the tool rest.

Remember that every shop has its own specif- ic hazards. Be sure, above all else, to use good common sense and reasonable caution each time you start this lathe, or any woodworking machinery. Proper safety standards rarely take any more time or energy when followed reli- giously. Develop a habit of safety.

G1067Z Wood Lathe

-15-

Page 15 Page 17
Page 16
Image 16
Grizzly G1067Z instruction manual Operations, Safety Rules For Wood Lathes
Page 15 Page 17

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.
Top Page Image Contents