Manuals / Grizzly / Power Tools / Saw

Grizzly G1067Z instruction manual Clean up Site Considerations

Models: G1067Z

1 28
Download 28 pages 24.13 Kb
Page 6
Image 6

Clean up

 

Site Considerations

 

 

 

 

 

 

The bed and other unpainted parts of the Model G1067Z are coated with a waxy oil that protects them from corrosion during shipment. Remove the protective coating with mineral spirits and paper towels. DO NOT use gasoline or other petroleum based solvents because of their extremely low flash points. Serious personal injury may occur. DO NOT use chlorine-based solvents – if you happen to splash some onto a painted surface, you will ruin the fin- ish.

Follow the safety rules listed below when working with solvents. Failure to do so may result in serious personal injury.

1.Read and follow all directions and warnings on the solvent label.

2.Work only in a well ventilated area.

3.Do not work near any type of open flame (e.g., pilot lights, kerosene heaters, and so on).

4.DO NOT smoke while working with flammable material.

5.Paper towels from the cleaning process are extremely combustible. Dispose of waste towels so they do not create a fire hazard.

Floor Load: Your G1067Z Lathe represents a large weight load in a small footprint. Most commercial floors are suitable for the Model G1067Z. Some residential floors may require additional build up to support both machine and operator.

Working Clearances: Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a home for your Wood Lathe. Allow sufficient room to safely run your machines in any foreseeable operation.

Lighting and Outlets: Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical circuits should be dedicated or large enough to handle amperage requirements. Outlets should be located near each machine so power or extension cords are clear of high- traffic areas. Observe local electrical codes for proper installation of new lighting, out- lets, or circuits.

 

 

 

 

 

 

 

 

 

 

 

 

G1067Z Wood Lathe

-5-

Page 5 Page 7
Page 6
Image 6
Grizzly G1067Z instruction manual Clean up Site Considerations
Page 5 Page 7

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.