Manuals / Grizzly / Power Tools / Saw

Grizzly G1067Z instruction manual Installing the Switch

Models: G1067Z

1 28
Download 28 pages 24.13 Kb
Page 10
Image 10

Installing the Switch

Do not plug cord in until you are ready to test run the lathe. See Test Run section for instructions before initial run.

1.Locate the on/off switch and the front and rear covers which will be held in place by two Phillips® head screws.

2.Make sure the wiring from the switch goes through the rear cover box. Position the switch in the opening in the left front leg of the stand. Figure 5. Attach the two green ground wires to the stand (see arrow) using the Phillips® screw provided.

3.Line up the front cover, the switch and the rear cover with the holes in the stand and attach using two 10 - 24 x 1" Phillips® head screws and nuts.

4.Locate the plug-in connector coming from the motor and connect it with the connector coming from the switch. Figure 6 shows a properly assembled switch and the connec- tor.

This equipment must be grounded. Please ensure that this machine is continuously grounded from the motor to the machine frame and then to a known ground. Verify that any existing electrical outlet and circuit you intend to plug into is actually grounded. If it is not, it will be necessary to run a separate 12 A.W.G. copper grounding wire from the outlet to a known ground. Under no circumstances should the grounding pin from any three- pronged plug be removed. Serious injury may occur.

Figure 5.

Figure 6.

G1067Z Wood Lathe

-9-

Page 9 Page 11
Page 10
Image 10
Grizzly G1067Z instruction manual Installing the Switch
Page 9 Page 11

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.