Grizzly Clean Up Assembly, Assembled power feeder Model G1095/G1096 1-HP Power Feeder

Clean Up Assembly

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 6. For thor- ough cleaning, some parts must be removed.

For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner that may damage painted surfac- es. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser

A great product for removing the waxy shipping grease from your machine during clean up.

Figure 6. Cleaner/degreaser available from

Grizzly.

-16-

To correctly position this power feeder on your table top, assemble the power feeder base assem- bly in the order shown in Figure 7 (refer to the parts diagram for any intricate details).

Figure 7. Item installation order.

Next, connect the stand to the power feeder, as shown in Figure 8. With your power feeder unit completely assembled, it will be easier for you to determine where on the table top to drill your base mounting holes, so you can take advantage of the full range of power feeder swing and adjustments. Refer to Base Mounting on Page 17.

Figure 8. Assembled power feeder.

Model G1095/G1096 1-HP Power Feeder