Grizzly G4186Z instruction manual Unpacking, Parts Inventory

Unpacking

The bandsaw is shipped from the factory in a carefully packed crate. If you find the machine to be damaged after you have signed for delivery, and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for inspection by the carrier or their agent. Without the packing materials, filing a freight claim can be difficult. If you need advice regarding this situa- tion, please call us immediately.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

The model G4186Z is a heavy machine (345 lbs. shipping weight). DO NOT over-exert yourself while unpacking or moving your machine – get assistance.

If moving this machine up or down stairs, the machine must be disman- tled and moved in smaller pieces. Make sure the stairs are capable of sup- porting the combined weight of the machine parts and the people mov- ing them.

Some die-cut metal parts may have sharp edges (“flashing”) on them after they are formed. Please examine the edges of all die- cut metal parts before handling them. Failure to do so could result in injury.

Parts Inventory

After all the parts have been removed from the crate, you should have:

¥Bandsaw Unit

¥Table

¥Table Bracket

¥Fence

¥Fence Rails

¥Miter Gauge

Hardware Bag	Qty
Cap Screws 1Ú4" - 20 x 11Ú2"	4
Fence Spacers	4
Table Insert	1
Table Trunnion Knobs	2
Lock Washers 3Ú8"	2
Roll Pin 3 x 10mm	1
Allen¨ Wrench 3mm	1
Allen¨ Wrench 4mm	1
Allen¨ Wrench 5mm	1
Round Guide Block	6
Setscrew 1Ú4"-20 x 1Ú4"	6

In the event that any parts are missing, we will be happy to replace them. Contact our Customer Service number for assistance. If any non-propri- etary parts such as nuts, bolts or washers are missing, we will be happy to replace these too, but for the sake of expediency, these items can be obtained at your local hardware store.

-8- G4186Z 18" Bandsaw