SECTION 4: IDENTIFICATION
2
3
4 
5
6
1
8
7
The following is a list of controls and components on the Model G7297 Disc Sander. Please take time to become familiar with each item and its location. These items will be used throughout the manual and know- ing them is essential to understanding the instructions and terminology used in this manual.
1.Aluminum Disc (Sanding Disc Attached)
2.Disc Guard
3.Motor
4.ON/OFF Switch
5.Base
6.Dust Port (Opening Not Visible)
7.Miter Gauge
8.Work Table
G7297 Disc Sander |
