BEFORE YOU START, CONT’D
Fig 4. Blade side view.
From Figure 4:
Blade Retaining Screw: Secures blade
to saw.
Arbor Washer: Used to stabilize blade.
Blade Guard: Protects operator from blade.
Blade Guard Handle: Used to lift blade guard out of the way for blind cuts or when replacing blade.
Saw Base: Supports saw through cuts.
Edge Guide: Allows cutting along the edge of material from predetermined point.
Fig 5. Handle side view.
From Figure 5:
Hand Grip: Main handle for supporting the saw when making a cut.
Trigger Lock Out: Safety device that keeps the saw from accidental start- up.
Trigger: Starts and runs saw after trigger lock has been depressed.
Stabilizing Hand Grip: Used in conjunc- tion with hand grip to stabilize saw when making a cut.
4mm Allen® Wrench: Used on blade retaining screw to install and remove blades.
Battery: 18 volt battery for use with this saw.
Positive Stop Screw: Adjusts so that base stops at 90° to blade.
G8598 51⁄8" Cordless Trim Saw |
