Preface
Unpacking/Shipping Information
This product has been carefully inspected, tested and calibrated before shipment to ensure years of stable and troublefree service. Please check the equipment for any visible damage which may have occurred during transit.
Please confirm that all items listed on the packing list have been received. If any item on the packing list is missing, please contact your Leitch dealer. If any item is damaged please contact the carrier. Ensure that all packaging material is removed from the product and its associated components before installing the unit.
It is suggested that you keep at least one set of original Leitch packaging, in the event that a product needs to be returned for service. If the original packaging is not available, you can purchase replacement packaging from Leitch at a modest cost or supply your own packaging as long as it meets the following criteria:
•Packaging must be able to withstand the product weight.
•Product must be held rigid within the packaging.
•There must be at least two inches of space between the product and the container.
•The corners of the product must be protected.
Products that are being returned to Leitch for servicing should be shipped
Installation Information
If this product is rack mountable, it should be mounted in an appropriate rack using the rack mounting positions and rear support guides provided. It is recommended that each frame be connected to a separate electrical circuit for protection against circuit overloading. If this product relies on forced air cooling, it is recommended that all obstructions to the air flow be removed prior to installing the frame in the rack.
If this product has a provision for external earth grounding, it is recommended that the frame be grounded to earth via the protective earth ground on the rear panel.
6800/7000 Series - Distribution and Routing Products Installation and Operation Manual | vii |
