Nokia 6800 Series, 7000 Series operation manual LED Indicators, Operation, Jumpers, Function, LEDs

Operation Chapter 9: VSE-6801 Serial Equalizing Amplifier Module

Operation

Jumpers

Jumper	Function
Error Reporting	The on error closing contact can report the
	following conditions:
	J1- No data
	J2- Equalizer has exceeded the preset cable length
Operating Standard	J3- Selects Composite operation 143 Mb/s or 177
	Mb/s.
	With no jumper fitted the selection is Auto.
	J4- Selects Auto standard selection.
	J5- Selects Component operation 270 Mb/s or 360
	Mb/s.

LED Indicators

LEDs	Function
Error	This indicates that the error condition set in 1
	exists.
No Data	This indicates that there is no input data.
Eq Warning	This indicates that the equalizer has reached the
	preset value. This is not illuminated if “no data” is
	illuminated.
270	This indicates that the current input standard is
	270 Mb/s (D1) This is not illuminated if “no data”
	is illuminated.
143	This indicates that the current input standard is
	143 Mb/s (D2-NTSC). This is not illuminated if
	“no data” is illuminated.
177	This indicates that the current input standard is
	177 Mb/s (D2-PAL). This is not illuminated if “no
	data” is illuminated.

6800/7000 Series - Distribution and Routing Products Installation and Operation Manual 95