Nokia 7000 Series, 6800 Series operation manual Mode Select Switch, Toggle Switch

Chapter 4: USM-6800 PAL/NTSC Monitoring Encoder Module User Interface

***This configuration decreases board power consumption from 5.4 to 5.0 W and requires that the jumpers be set to Position B. In all other cases, they should be in position A.

Mode Select Switch		Toggle Switch
Position	Function	Down	Up
5	Composite	2 comp+YC: Generates	4 comp: Generates 4
		2 composite and YC	composite analog
		analog outputs.	outputs. Position 4 of
		Position 4 of Mode	the Mode Select switch
		Select switch should be	should be configured
		configured for the	for the Composite
		Composite mode.	mode.***
6	Component	RGB: Generates RGB	YUV: Generates YUV
		analog output. Sync is	analog outputs. Sync is
		present on all of the	present on the Y
		outputs. On-board	output. On-board
		potentiometer allows	potentiometer allows
		the adjustment of	the adjustment of the
		overall gain and each	overall gain and each
		channel gain	channel gain
		independently.	independently.
		Position 4 of the Mode	Position 4 of the Mode
		Select switch should be	Select switch should be
		configured for	configured for
		Component output.	Component output.
7	V Blanking	Blank: All of the	Pass: All of the
		information in the VBI	information in the VBI
		is blanked: Up to line	is passed without
		20 in 525 line standard,	processing for digital
		up to line 23 in the 625	to analog output.
		line standard.
8	Setup	Off: The 7.5 IRE	On: The 7.5 IRE
		pedestal is not inserted	pedestal is inserted
		into the analog video in	into the analog video in
		525 line standard.	the 525 line standard.
9	Burst	Off: The burst is turned	On: The burst is turned
		off in the 525 or 625	on in the 525 or 625
		line standards.	line standards.
A	Chroma	Off: The chrominance	On: The chrominance
		is turned off in the 525	is turned on in the 525
		or 625 line standards.	or 625 line standards.

40 6800/7000 Series - Distribution and Routing Products Installation and Operation Manual