Configuration | Chapter 7: |
|
|
Configuration
Input Coupling
DC AC
J2 J2
J3 J3
Clamp Mode
NO HARD SOFT
CLAMP
J3 J3 J3
Input Coupling
Shunt positions for Clamp
Mode and Input Coupling are
illustrated by the symbols printed on the circuit board.
Figure
•For AC coupling: Place J2 and J3 in the upper position, as illustrated above.
•For DC coupling: Place J2 and J3 in the lower position, as illustrated above.
Clamp Mode
Clamping can be set to No Clamp, Hard, or Soft clamp via Jumper J1, as illustrated above.
6800/7000 Series - Distribution and Routing Products Installation and Operation Manual | 61 |
