Chapter 2: | Connections |
|
|
Connections
Channel 0 is connected to the dedicated DigiNet port (AUX B) of a given 6800 series frame. To allow several DNHs to be contained within a single frame without excessive loading of the transceivers, it is not terminated. Auxiliary B (Channel 0) can be disabled to allow several DNH modules in a single frame to be isolated from each other. An external terminator should always be installed on the frame’s dedicated DigiNet connector.
The other eight channels are connected to the eight output BNCs located on the backplane (the backplane’s input BNC is unused).
16 | 6800/7000 Series - Distribution and Routing Products Installation and Opertion Manual |
