Grizzly G8749 instruction manual Unpacking, Piece Inventory, Site Considerations

Unpacking

The Drum/Flap Sander is shipped from the facto- ry in a carefully packed carton. If you find the machine to be damaged after youÕve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for inspection by the carrier or their agent. Without the packing materials, filing a freight claim can be difficult. If you need advice regarding this situation, please call us.

When you are completely satisfied with the condi- tion of your shipment, you should inventory its parts.

NOTICE

Please keep all packaging materials until you are satisfied that the machine is in good condition. Should you need to file a freight claim, the carrier’s agent will require inspection of those materials. Settling a claim can be difficult if packaging is not available.

Piece Inventory

With all the parts removed from the container, you should have the components listed below:

¥Motor Assembly

¥53Ú4" x 8" Sanding Drum and Sleeve

¥31Ú4" x 8" Sanding Drum and Sleeve

¥6" x 10" Flap Sanding Assembly

¥Mounting Shafts and Washers (3)

¥End Caps (2)

If anything is missing, call or write to the Service Department listed in the General Information sec- tion. If anything is damaged, please follow the procedures described above.

Site Considerations

WORKING CLEARANCES

Working clearances can be thought of as the dis- tances between machines and obstacles that allow safe operation of every machine without lim- itation. Consider existing and anticipated machine needs, size of material to be processed through each machine, and space for auxiliary stands and/or work tables. Also consider the relative position of each machine to one another for effi- cient material handling. Be sure to allow yourself sufficient room to safely run your machines in any foreseeable operation.

LIGHTING AND OUTLETS

Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical circuits should be dedicated or large enough to handle combined motor amp loads. Outlets should be located near each machine so power or extension cords are not obstructing high-traffic areas. Be sure to observe local electrical codes for proper installation of new lighting, outlets, or circuits.

Make your shop “child safe”. Ensure that your workplace is inaccessible to young- sters by closing and locking all entrances when you are away. Never allow visitors in your shop when assembling, adjusting or operating equipment.

G8749 Drum/Flap Sander -7-