Grizzly G8793 instruction manual Unpacking, Piece Inventory

Unpacking

The Double Disc Sander is shipped from the fac- tory in a carefully packed carton. If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for inspection by the carrier or their agent. Without the packing materials, filing a freight claim can be difficult. If you need advice regard- ing this situation, please call us.

The G8793 is a fairly heavy machine (190 lbs). DO NOT over-exert yourself while unpacking or moving your machine – get assistance. In the event that your Double Disc Sander must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine. Serious per- sonal injury may occur.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

NOTICE

Please keep all packaging materials until you are satisfied that the machine is in good condition. Should you need to file a freight claim, the carrier’s agent will require inspection of those materials. Settling a claim can be difficult if packaging is not available.

Piece Inventory

With all the parts removed from the container, you should have the components listed below:

•Cabinet Stand

•Motor and Disc Assembly

•Tables (2)

•12" PSA Sandpaper Discs (2)

•Miter Gauge

If anything is missing, call or write to the appro- priate service department listed in the General Information section. If anything is damaged, please follow the procedures described to the left.

-8- G8793 12" Double Disc Sander