Grizzly G9956 instruction manual Secure a length of chain to each mounting eye

1.If the joists are covered by sheet rock, press board, paneling or other covering, use a stud finder to locate them, and mark their cen- ters.

2.Pre-drill 1/4" pilot holes into the marks on the joists. This will make threading the lag eyebolts much easier and reduce the risk of splitting the joists.

3.Thread the eye bolts into the pilot holes. Be sure to thread the eye bolts at least 11/2" into the joists.

4.Measure the desired length of your chains from the eyebolts. Remember to account for the connecting links and eyebolts on the double air filter.

5.Cut the chain to equal lengths and attach a connecting link to each end.

6.Secure a length of chain to each mounting eye.

7.GET SOME HELP! With at least one other person supporting the weight of the double air filter, connect the chains to the lag eye bolts.

NOTE—DO NOT use hooks in place of lag eye bolts. If the double air filter is bumped it could fall.

-14- Model G9956 (Mfg. since 12/09)