Unpacking
The Model G9958 is shipped from the manufac- turer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, immediately call Customer Service for advice.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
If moving this machine up or down stairs, the machine must be dis- mantled and moved in smaller pieces. Make sure floor and stair structures are capable of supporting the com- bined weight of the machine parts and the people moving them.
The G9958 is a heavy machine, 320 lbs. ship- ping weight. DO NOT
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Piece Inventory
After all the parts have been removed from the carton as shown in Figure 2, you should have:
•Main Base
•Right and Left Side Base
•Right and Left Side Legs
•Fan/Motor Assembly
•Collector Bodies
•Eight Casters
•Gaskets
•Two Upper Bag Supports
•Two Hangers
•Hardware Bag
•Two Bottom Bags
•Two Upper Bags
•Four Hole Inlet
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expediency, replacements can be obtained at your local hard- ware store.
Figure 2. G9958 parts layout.
NOTICE
A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.
G9958 4 H.P. Dust Collector |
