SECTION 6: OPERATIONS
Test Run
! | Disconnect power to the | |||
machine when perform- | ||||
| ing | any | maintenance, | |
| assembly | or | adjust- | |
| ments. Failure to do this | |||
| may | result in | serious | |
| personal injury. |
| ||
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire operations process. Failure to com- ply may result in serious personal injury.
Always wear a dust mask when operating the Model G9958. Using this machine produces sawdust which may cause allergic reactions or respiratory problems.
Once assembly is complete and adjustments are done to your satisfaction, you are ready to test run the machine.
Turn on the power supply at the main panel. Press the START button. Make sure that your fin- ger is poised on the STOP button, just in case there is a problem. The dust collector should run smoothly, with little or no vibration or rubbing nois- es. Strange or unnatural noises should be investi- gated and corrected before operating the machine further.
If you cannot easily locate the source of an unusual noise or vibration, contact our service department for help.
General
Operating your Model G9958 is simple and straightforward. Blast gates located at each of the machines controls the air flow from the wood- working machine to the dust collector. If a machine is not being used, keep the blast gate closed to maintain higher levels of efficiency throughout the system.
G9958 4 H.P. Dust Collector |
