SECTION 6: OPERATIONS
Keep loose clothing out of the way of machinery and keep hair pulled back.
Disconnect power to the machine when perform- ing any adjustments or maintenance. Failure to do this may result in seri- ous personal injury.
Wear safety glasses dur- ing all operations on the jointer. Failure to comply may result in serious personal injury.
Always wear a dust mask when operating the joint- er. Using this machine produces sawdust which may cause allergic reac- tions or respiratory prob- lems.
NOTICE
The following section was designed to give instructions on the basic operations of this jointer. However, it is in no way comprehen- sive of every jointer application. There are many different jigs that can be built to increase safety, accuracy, and types of cuts. WE STRONGLY RECOMMEND that you read books, trade magazines, or get for- mal training to maximize the potential of your jointer.
Read the entire manual before making any cuts
with your jointer. Serious personal injury may result if safety or operational information is not understood or fol- lowed.
Test Run
Once assembly is complete and adjustments are done to your satisfaction, you are ready to start the machine.
Plug the machine into the power supply. Flip the switch up to the start position. Make sure that your finger is poised over the switch in case you need to turn the jointer off. The jointer should run smoothly with little or no vibration or rubbing nois- es. Strange or unnatural noises should be inves- tigated and corrected before operating the machine further.
Run the Model H2801 for a short time to ensure that the moving parts are working properly with no excessive vibration. If any problem develops, correct it before attempting to use the machine.
If you cannot locate the source of unusual noises or cannot fix any problems that arise, immediate- ly contact our service department for help.
H2801 4" Jointer |
