Covered Areas
In preparation for the finish coating, protect the following parts of the guitar (Figures 8 & 9):
•Bridge Mounting Location
•Fingerboard
•Sound Hole (Hole Filled With Newspaper)
Figure 8. Masked bridge area and
blocked sound hole.
Figure 9. Masked fingerboard.
Use a small stick of wood to carefully press all the masking tape edges securely to the guitar pieces. The finish coat can seep under these edges, especially near corners, uneven edges, and where the frets meet the fingerboard. Note— Failure to correctly mask off these areas could result in unrepairable damage to the guitar.
H3122 Classical Guitar Kit |
