
Machine Heads
The machine heads mount so the buttons are on the back side of the headstock.
To install the machine heads:
1. Slide the machine heads through the peg holes on the side of the headstock. Note— Make sure the lyre end of the machine head is positioned as shown in Figure 10.
Lyre
Figure 10. Correct tuning machine position.
4.Using a 1⁄16" drill bit, drill 5⁄16" deep holes straight through the screw holes in the machine heads.
5.Secure the machine heads to the guitar headstock with the included eight 5⁄16" wood screws.
Installing Strings
The correct position of the guitar strings are shown in Figure 11. The thin High E string is called the “1st” string and the thick Low E string is called the “6th” string.
6E
5 A
4 D
3 G
2 B
1 E
Figure 11. Correct guitar string position.
To install the guitar strings:
1.Slide the string ends through the holes in the bridge.
2.Tie the strings as shown in Figure 12.
Figure 12. Correct string knots.
(Continued)
H3122 Classical Guitar Kit |