Grizzly H3122 instruction manual Fingerboard to Neck, To attach the fingerboard to the neck

Fingerboard to Neck

To attach the fingerboard to the neck:

1.Using a straightedge, make sure the neck and body surface are flush.

2.Using rubber bands and small sticks of wood, secure the fingerboard to the neck with a thin, even layer of wood glue (Figure 5). Note—Make sure the fingerboard is cen- tered across the width of the neck and that the 12th fret is centered over the neck to body joint.

Figure 5. Securing the fingerboard to the neck.

3.After the fingerboard has thoroughly dried, use a file or sandpaper to make the edge of the neck flush with the edge of the finger- board.

-8- H3122 Classical Guitar Kit