Grizzly H3390 instruction manual Blade Guard Lock Knob

9.Attach the blade guard to the motor assem- bly using the M8-1.25 x 30 lock knob and M8 flat washer as shown in Figure 11. Tile saw blades are sold separately.

Blade Guard

Lock Knob

Figure 11. Attaching the blade guard.

10.Place the water pump inside the water reser- voir and plug the pump cord into the recepta- cle on the side of the motor assembly. A plas- tic hose runs from the pump to a “Y” connec- tor and then slides through two mounting holes on each side of the blade guard base (Figure 12).

“Y” Connector

Hose

Mounting

Holes

Water Pump

Figure 12. Lube system.

11.Slide the chrome table rail through the mounting holes on the table as shown in Figure 13.

Saw Table

Table Rail

Figure 13. Assembling the table rail.

12.Slide the silver aluminum rail cover over the rail as shown in Figure 14.

Rail Cover

Figure 14. Assembling the rail cover.

-12- H3390 Wet Tile Saw