Grizzly H3390 instruction manual Water Reservoir Saw Frame

3.Mount the saw frame to the stand using (2) M6-1.0 x 20 carriage bolts, (2) M6 external tooth washers, and (2) M6-1.0 knob bolts as shown in Figure 6.

Figure 6. Mounting the saw frame to the stand.

4.Slide the plastic water reservoir into one end of the saw frame as shown in Figure 7. Be sure the reservoir is not protruding from either end of the frame.

Water Reservoir

Saw Frame

Figure 7. Installing the water reservoir.

5.Slide the pivot shaft into the riser block as shown in Figure 8. Be sure the notched end of the pivot shaft is positioned correctly.

6.Secure the assembly with a M10-1.5 x 10 setscrew as shown in Figure 8.

7.Slide the pivot shaft into the mounting holes on the motor assembly and secure with the blade height adjustment knob as shown in Figure 9.

H3390 Wet Tile Saw

Notch

Setscrew

Figure 8. Attaching the pivot shaft to the riser

block.

Mounting Holes

Blade Height

Adjustment Knob

Figure 9. Securing the riser block to the motor assembly using the blade height adjustment knob.

8.Mount the motor assembly to the frame using

(2)M10-1.5 x 75 hex bolts, (2) M10 lock washers, (2) M10 flat washers, and (1) M10- 1.5 x 15 setscrew as shown in Figure 10.

Setscrew

Motor Assembly

Figure 10. Mounting the motor assembly. -11-